Independent repair center Specialist technicians
Spare parts
Elba Spare Parts — Original Italian and Quality Alternatives
Genuine Elba spare parts for every stove, oven and built-in hob: oven thermostat, door hinges, double safety thermocouple, burner caps and spark plugs. Send a photo of the part on WhatsApp 01050887010 and we confirm the exact match, price and availability before anyone comes out. Or call 16062, 24/7.
- Original and quality alternative
- Photo-match on WhatsApp
- Common parts in the van
- Fitted and tested
- Written centre warranty
Why customers choose us
- 16062 24/7 support line
- Inspection + written warranty On every repair
- Genuine spare parts Backed by our center
- Same-day technician Greater Cairo
Elba Spare Parts Order Number
Need a specific Elba part? Call the unified short number 16062 — 24/7 — or WhatsApp 01050887010 with a photo of the part and your appliance model, and we reply with the exact match, the price, and when we can fit it.
We supply Elba parts in two transparent options: original Italian parts, or high-quality alternative parts that cost less. The technician tells you which one is going in and why, before fitting. The most-requested parts ride in the technician's van; rarer parts for older models are ordered with a confirmed date.
To be clear about who we are: FixStove is an independent specialist repair centre for Elba appliances — not the official Elba agent. If your appliance is still under a valid factory warranty, contact the official agent first, because the repair is free and any work outside the agent can affect that warranty. After the warranty ends, we are the faster route, with a written centre warranty on the part and the labour.
Need a specific Elba part? Call the unified short number 16062 — 24/7 — or WhatsApp 01050887010 with a photo of the part and your appliance model, and we reply with the exact match, the price, and when we can fit it.
We supply Elba parts in two transparent options: original Italian parts, or high-quality alternative parts that cost less. The technician tells you which one is going in and why, before fitting. The most-requested parts ride in the technician's van; rarer parts for older models are ordered with a confirmed date.
To be clear about who we are: FixStove is an independent specialist repair centre for Elba appliances — not the official Elba agent. If your appliance is still under a valid factory warranty, contact the official agent first, because the repair is free and any work outside the agent can affect that warranty. After the warranty ends, we are the faster route, with a written centre warranty on the part and the labour.
Quick Info
- Elba spare parts order number: 16062 (24/7)
- WhatsApp: 01050887010 — send a photo of the part
- Options: original Italian, or high-quality alternative
- Availability: common parts in the van, rare parts ordered
- Coverage: Cairo and Giza same day, Alexandria and Delta in 24–48 hours
- Warranty: written, covering both the part and the fitting
Order Genuine Elba Parts on WhatsApp — Send Part Photo
The fastest way to get the right Elba part is a photo. Guessing a part name over the phone is how people end up with a burner cap that does not seat or a thermostat with the wrong capillary length.
Send these three things to WhatsApp 01050887010:
- 1 A photo of the part itself — removed if it is safe to remove (caps, hinges, spark plug), or in place if it is not (thermostat, thermocouple, gas valve).
- 2 A photo of the model plate — on Elba appliances it is usually on the oven door frame (open the door and look at the inner edge), or on the underside of a built-in hob.
- 3 The hob or oven width — 60 cm or 90 cm. This single detail decides half the part numbers on Elba built-ins.
We reply with the exact match, whether it is original or alternative, the price, and the earliest fitting slot. No charge for the identification, and no obligation to book.
Safety note: never remove a gas valve, thermocouple or any part connected to the gas line yourself. Photograph it in place and let the technician disconnect it — a badly refitted gas fitting is a leak risk, not a saving.
Elba Part Types We Repair and Replace Most Often
These five parts account for most of the Elba part requests we handle in Egypt. Each card tells you what the part does, how it announces its own failure, and what fitting involves.
Elba Oven Thermostat
- What it does — senses the cavity temperature and cycles the heating element or gas valve to hold the number you set.
- Failure sign — the oven burns food on a moderate setting, never reaches temperature, or heats non-stop until you switch it off.
- How we confirm it — an oven thermometer against the set dial before condemning the part; a drifting thermostat and a dying element look identical from outside.
- Fitting note — the capillary bulb has to be clipped back in its original position, clear of the cavity wall, or the new thermostat reads wrong from day one.
- Recommendation — original for accuracy; this is a part where a cheap copy drifts within months.
Elba Oven Door Hinges
- What it does — spring-loaded hinges hold the door closed against the seal so heat stays inside.
- Failure sign — the door no longer sits flush, heat escapes past the top edge, the glass edges darken, or the door drops open instead of holding position.
- Quick test at home — close the door on a sheet of paper; if it slides out with no resistance, the door is not sealing.
- Fitting note — hinges are replaced in pairs. One new hinge against one tired hinge twists the door and kills the seal on the opposite side.
- Recommendation — original or a matched pair of quality alternatives; mixed brands rarely align.
Elba Double Safety Thermocouple
- What it does — sits in the flame, generates a few millivolts, and holds the gas safety valve open. If the flame goes out, the millivolts stop and the gas is cut. It is the safety device on the appliance.
- Failure sign — the burner or oven lights while you hold the knob, then dies within seconds of releasing it.
- How we confirm it — clean and reposition first, measure the output second, replace third. Many "dead" thermocouples are just sooted or sitting outside the flame.
- Fitting note — the tip belongs roughly 3–5 mm inside the flame. Position is as important as the part.
- Recommendation — original only. This is the part that stops gas flowing into your kitchen; unknown-source copies are not worth the saving.
Elba Burner Caps
- What it does — the brass or enamelled cap seats on the burner head and shapes the flame ring.
- Failure sign — a yellow, lopsided or lifting flame, soot on the bottom of pans, or a burner that will not stay lit at low setting.
- Check before ordering — lift the cap and reseat it squarely. A large share of "yellow flame" calls are a cap sitting a millimetre off its locating pins.
- Fitting note — caps come as a set of diameters per model (small, medium, large, and the wok ring on 90 cm hobs). Send the hob width so we send the right set.
- Care — keep brass caps out of the dishwasher; the detergent discolours and pits them.
Elba Spark Plugs (Ignition Electrodes)
- What it does — the ceramic-insulated electrode delivers the spark from the ignition transformer to the burner head.
- Failure sign — no ticking at all on one burner, weak sparking, or the opposite problem: continuous ticking that will not stop even after the burner lights.
- The usual cause of non-stop ticking — moisture or spilled liquid around the electrode or switch, or a hairline crack in the ceramic that leaks the spark to earth.
- Try first — disconnect the power, dry thoroughly around the burners and switches, and leave it an hour before calling.
- Fitting note — the replacement needs matching lead length and the correct gap to the burner head; too wide a gap and it will not jump reliably.
Elba Oven Parts and Gas Stove Parts — Full Reference
Beyond the five above, these are the Elba stove, oven and hob parts we stock or source most often:
| Part | What it does | What you notice when it fails | What fitting involves |
|---|---|---|---|
| Gas valve (tap) | Opens gas and controls the burner | The knob spins freely without releasing gas | Same visit; gas line disconnected by the technician only |
| Ignition transformer | Generates the spark for all burners | No burner sparks at all | Same visit |
| Burner heads | Distribute gas under the cap | Uneven flame ring, blocked ports | Same visit |
| Oven heating element (upper / lower) | Heats the electric cavity | Food cooks on one side only, grill dead | Same visit |
| Convection fan and motor | Circulates heat around the cavity | Uneven baking, noise from the back wall | Same visit; oven pulled out on built-ins |
| Cooling fan (built-in ovens) | Cools the electronics and cabinet | Oven shuts itself off mid-bake, hot control panel | Same visit; front panel removed |
| Door seal (gasket) | Keeps heat inside the cavity | Heat escaping, long preheat, hot outer door | Same visit |
| Inner door glass | Insulating layer of the door | Cracked, chipped, or heavy condensation between panes | Ordered to model size, then fitted |
| Ceramic hob element | Radiant heat under the glass-ceramic surface | One zone stays cold | Same visit once the model is confirmed |
| Touch control board | Reads the touch panel on ceramic and induction hobs | Panel unresponsive or lighting up on its own | Diagnosed first — moisture often mimics board failure |
| Hood motor | Extracts cooking air and steam | Loud noise, or weak extraction despite clean filters | Same visit; matched by hood width and turbine count |
| Circular carbon filter | Removes odour on ductless (recirculating) hoods | Smells linger although airflow feels normal | Same visit; replaced every 3–6 months, never washed |
| Aluminium grease filters | Trap cooking grease before the motor | Grease dripping under the hood, weak airflow | Washed monthly — replaced only if bent or torn |
| Hood lamps (halogen / LED) | Light the cooking surface | One or both lamps dead | Same visit; both dead together usually means the transformer, not the lamps |
Not sure which one you need? Send a photo to WhatsApp 01050887010 and we identify it for you.
Elba Built-in Hob and Oven Parts
Built-in Elba appliances carry everything above, plus parts that free-standing cookers simply do not have: the touch control board, the tempered glass-ceramic surface, an independent flame-failure sensor per burner, and the cooling fan that protects the oven electronics.
Two things are worth knowing before you order a built-in part. First, the width decides the part: a 60 cm hob and a 90 cm hob share almost no glass, cap set or element. Second, fitting usually means lifting the hob out of the worktop or pulling the oven from its housing — done with the right tools it leaves no scratch and the seal is renewed on refit, done with the wrong tools it costs you a worktop.
Original Italian vs High-Quality Alternative Elba Parts
| Original Italian part | High-quality alternative | |
|---|---|---|
| Specification match | Made to Elba's own specification | Close specification from a trusted factory |
| Best for | Safety and precision parts — thermocouple, thermostat, control board | General parts — caps, seals, elements, heads |
| Price | Higher | Noticeably lower |
| Life expectancy | Longest | Good, shorter than original on precision parts |
| Our warranty | Written, on part and labour | Written, on part and labour |
One warning worth repeating: a cheap part of unknown origin in a safety role — the thermocouple above all — either brings the fault straight back or becomes a hazard. That is why we always name the source of a part before fitting it, and why we recommend original for anything that controls gas.
Signs Your Elba Appliance Needs a Part Replaced
Ignition clicks but no burner lights, or clicking that never stops
The burner lights and dies the moment you release the knob
A yellow or lifting flame that survives a proper cleaning
The knob spins freely without releasing gas
The oven burns food on a moderate setting, or never gets hot
Heat escaping from the door, or a door that will not stay closed
A built-in oven that switches itself off part-way through baking
One zone of a ceramic hob stays cold, or the touch panel ignores you
How We Fit an Elba Part in 3 Steps
- 1
Send a photo or call 16062
the part, the model plate, and the hob or oven width.
- 2
We confirm match, option and price
original or alternative, availability, and the earliest slot. Free inspection if the fault still needs diagnosing.
- 3
Fitted, tested and warrantied
the technician fits the part, tests the appliance in front of you, and issues a written centre warranty on a tax invoice.
Frequently Asked Questions About Elba Spare Parts
Are Elba spare parts available in Egypt?
Yes. The most-requested Elba parts — burner caps, heads, gas valves, spark plugs, thermocouples and ignition transformers — ride in the technician's van. Rarer parts for older or 90 cm models are ordered and usually arrive within days.
Are your Elba parts genuine?
We supply original Italian parts made to Elba's specification, and high-quality alternatives that cost less. We tell you which one is going into your appliance before we fit it — for safety parts we recommend original and say so.
Can I send a photo instead of a part number?
Yes, and it is the method we prefer. Send the part, the model plate and the appliance width to WhatsApp 01050887010 and we identify it. Elba part numbers vary between production years, so a photo is more reliable than a number read over the phone.
Are you the official Elba service centre?
No. We are an independent specialist repair centre for Elba appliances, not the official Elba agent. If your appliance is still under factory warranty, go to the official agent first — the repair is free there.
Will you fit a part I bought myself?
The technician will assess it, but we can only warranty parts we supply. If the part you bought is the wrong specification — a common outcome with caps and thermostats — we will tell you before fitting rather than after.
Is there a warranty on Elba spare parts?
Yes. Both original and quality alternative parts carry a written centre warranty covering the part and the fitting, on a tax invoice. The period depends on the part type.
Do you cover Alexandria and outside Cairo?
Yes. Cairo and Giza are same day; Alexandria, the Delta and the North Coast are typically 24–48 hours. Call 16062 with your area and we confirm the slot.
Need Elba appliance repair?
A Elba specialist reaches you within the hour — free inspection, spare parts, and a written warranty on every repair.
19 شارع الأعناب، المهندسين، الدقي، الجيزة