FixStove
Common fault

Built-in Hob Won't Ignite — Solutions

A built-in hob that won't ignite usually has an electronic-ignition or safety-sensor fault. Its repair needs a built-in specialist.

Symptoms

If you notice one or more of these symptoms, this page is for you:

  • The burners do not light
  • The electronic ignition does not respond
  • Only a specific burner fails to light

The most common causes

1

Faulty electronic ignition

The part that sparks the burners.

2

Safety sensors triggered incorrectly

They block ignition for the wrong reasons.

3

Faulty control board

It does not route the signal to the burners.

4

No power

The hob needs power for ignition.

Solutions

A simple check

Check the power

  1. 1 Check the circuit breaker
  2. 2 Check for a disconnected visible plug or connection
  3. 3 If power is fine, you need a specialist technician

The fix = a specialist technician

  • Repair or replace the electronic ignition
  • Test and reset the safety sensors
  • Repair the control board

When to call a technician

  • If none of the burners light
  • If power is fine but the hob does not respond
  • If safety sensors are blocking ignition

We repair built-in hobs for all brands: Bosch, Siemens, Ariston, Smeg, Teka, and more.

See all built-in repair services
Or call directly on 16062

Quick diagnosis for Built-in hob won't ignite

Use this table to identify the closest cause before calling. If gas smell is involved, treat it as an emergency.

Symptom
The burners do not light
Faulty electronic ignition
Repair or replace the electronic ignition
The electronic ignition does not respond
Safety sensors triggered incorrectly
Test and reset the safety sensors
Only a specific burner fails to light
Faulty control board
Repair the control board
Only a specific burner fails to light
No power
Check the power

Main service related to this fault

Built-in repair

Related faults that may be the cause

Frequently asked about Built-in hob won't ignite

Can I fix it myself?
Checking power, yes. Anything in ignition or the board needs a specialist.
Does the hob need to be removed?
Not always. The technician tries an in-place repair first.
How much does it cost?
Inspection is free and the technician explains the cost.
Is there a warranty?
Yes — a written warranty.

Have the same problem? Call now

A specialist technician reaches you within an hour with free inspection and warranty up to a year.

  • Free inspection
  • Technician within 1 hour
  • Warranty up to 1 year
  • 24/7 service
Chat on WhatsApp